Product description: 
 Collected from natural palm resins and other natural materials from the deployment of specific wood flooring, solid wood furniture and wood products such as hygroscopic deformation, easy to lose the luster and the scratching and other characteristics of the development of products, it contains a new formula of the 2nd generation of natural nano bright surface, more penetration, durability better, has not only made on the floor after each use, furniture, better to be absorbed by the wood to prevent the deformation of the material dry at the same time nourish the wood, from outside to inside, deep moisturizing. The wooden floor, furniture and splendor, fiber absorption, so that moisture can not enter the wood and prolong life. 


 Product Features: 
 Scratch - natural resin in the wood floor surface to form a protective film to prevent minor scratches and can use this product for some time after a slight scratch to deal with the same color of, and thus to prevent scratches to deepen and darken. 
 Anti-dry - wood was made into flooring and furniture, but it does not thereby lose the characteristics of plants, easy and thermal expansion and contraction with the weather, wet and dry, often cracks in the floor fitted with a burst of the product natural resin timely help to the floor to supplement the required resin and moisturizing, so that the floor is not easy to dry. 
 Luster gradually dim light - wooden floors, furniture, because there is no maintenance, this product contains natural resin can make wood products is rapidly absorbed and reply shiny and bright as new. 
 Moisture - wood flooring furniture nemesis is water, wood spirits containing ingredients with a waterproof, can prevent the wood due to damp and moldy. 
 Decontamination - products containing nano-silver technology, so the use of instant decontamination effect, and the wood surface fresh and not slip. And anti-static and sticky gray. 



 Floor oils to use: 

 1, first floor of the house cleaned, the nozzle connected to a bottle of spirits uniform spray to the surface of the floor; 
 2, then floor dedicated electrostatic mop or slightly damp cloth, evenly wipe the spirits to open the floor surface; 
 3, wait for about five to eight minutes, to be on the floor of essential oils are absorbed, then electrostatic mop or dry cloth to wipe back and forth, you can find the original floor of your home can also be more friction bright Oh; 


 Note: 
 ● This product is collected from natural plant non-toxic tasteless, better Shake before use; 
 ● long-term use to achieve the desired results, the full complement of wood oil; 
 ● It can be used instead of wax and other wax will not have any reaction; 





 Solid wood flooring, wood floors, floor maintenance] 

 After the laying of solid wood flooring, at least to health 24 hours before use, otherwise it will affect the solid wood floor effect. General solid wood flooring poor water resistance, and is not appropriate measures to wipe with a damp cloth or water, so as not to lose their luster. After the daily lives of the conservation of good solid wood flooring, specific measures are as follows: 



 Daily use to scratch the floor to avoid heavy metal sharps, glass tiles, studs and other hard objects; moving furniture move and do not drag on the floor surface; do not make contact with the floor open flame or directly on the floor and place a high-power electric ; ban placed on the floor of a strong acid and strong alkaline substances; the absolute prohibition of long flooding. 



 If outdoor humidity is greater than the indoor humidity, can shut the doors and windows, keeping the low humidity of indoor, outdoor humidity is less than the indoor humidity can open the doors and windows to reduce indoor humidity. In hot and humid weather, you can open the air conditioning or fans. 



 Humidity inside the room should not be too large to keep the floor dry, smooth, and daily cleaning wrung cotton mop to wipe: In case of stubborn stains. Should use a mild cleaning solvent and then wipe wrung cotton mop to wipe, do not use organic solvent scrubbing of acid and alkaline solvents or gasoline. 



 In order to maintain the real appearance of the floor and extend paint life. Recommend waxing maintenance twice a year. Wipe clean and wax before the first floor, and then evenly spread on the surface layer of floor wax, slightly dry with a soft cloth until smooth and shining. 



 If you accidentally a large area of ??flooding or partially soaked in water for long periods, if out of water retention should promptly with a dry cloth sucking, and let it dry naturally, is strictly prohibited to use electric heaters or drying in the sun exposure. Prolonged exposure to strong sunlight or room temperature, steep and so may cause premature aging of the wood floor finish should be avoided. 



 Venues such as the installation is complete for the time being live. To maintain the indoor air circulation, can not cover with plastic wrap or newspaper to avoid a long time, the surface coating of sticky and dull. 



 Regular cleaning floors, vacuuming, to prevent the friction of sand or dust accumulation and scratching the floor surface. Can be placed at the door mat, in order to avoid the friction of sand or dust into the interior. Usually available when cleaning the floor holding dry cotton mop. Can not wipe the floor with a wet mop or corrosive. Autumn and winter in order to increase the humidity of indoor air, you can use a humidifier to make the indoor air humidity remained at 50% and 70%. Movable furniture should not be directly on the floor push-pull, should be raised to move and light up. Moving furniture can often stick in the bottom layer of rubber. 



 Clean-up methods of special stains: grease, paint, ink, you can use special scouring oil cloth; blood, fruit juice, wine, beer and other stains with a damp rag or wipe with a rag dipped in an appropriate amount of floor cleaner, not with force alkali liquid to clean up the wood floor 



 Solid wood flooring points: 



 (1) floors should be laid later in the construction, may not cross the construction. As soon as possible after the laying of sanding and painting. So as not to dirty the floor or damp deformation. 
 (2) floor before laying should be unpacking stacked in 1 to 2 days of laying the scene to make it adapt to the environment, in order to avoid laying swelling and shrinkage deformation. 
 (3) laying should be prepared to moisture measures, especially the bottom of the wet occasions. Moisture-proof measures are coated with a moisture-proof paint and laying damp proof membrane, the use of foreshadowing treasure. 
 (4) The keel should be smooth and firm, avoid reinforced with cement, preferably with expansion bolts, the United States solid nail. 
 (5) The keel should use a strong nail holding power of larch, lauan wood. Keel or gross floor moisture content should be close to the moisture content of the floor. 
 Keel spacing should not be too large, and generally not more than 30 cm. The floor should be implemented at both ends in the keel shall not be an empty shelf, and each keel must be nailed nails. Do not use water-based glue. 
 (6) floor shop should not be too tight and should stay around enough expansion joints (0.5 to 1.2 cm) and extra-wide should not laying the case of wide occasions should be separated, cut off, and then pressed copper Transitional. 
 (7) stone ground floors and rooms, bathroom, kitchen junction should be thorough isolation moisture measures. 
 (8) floor color is inevitable, such as chromatic aberration with higher requirements for pre-sorting, a gradual transition approach to reduce the visual mutation sense. 
 Avoid the use of (9) wash with water, avoid prolonged sun exposure, air conditioning, for blowing straight, to prevent the window at the rainforest, to avoid a hard object hit the friction. To protect the floor, in the finish waxing, waxing (from the perspective of protecting the floor better than paint effect). 



 Maintenance of wood flooring: 



 A semi, clean mop. Home the air is dry, wet mop may be some or put a pot of water or a humidifier humidifiers in the heating. 
 After laying, the best time to wax. In the course of normal use, a three-monthly waxing once. In fact, do not fight also available, but often waxing can keep the floor finish to extend the life of the solid wood flooring. 
 3, try to avoid the wooden floor with a lot of water contact; wipe avoid acidic, alkaline liquid, so as not to damage the floor surface paint finish. 
 To avoid sharp objects to scratch the ground, do not throw cigarette butts on the floor or placed too hot, try to avoid dragging heavy furniture. 
 5, the floor during use, if the individual floors from the shell or off, should be promptly taken from the floor, stripped off the old glue and ash, coated with the new plastic compaction. Per month to play a wax maintenance is the best method, but before waxing to clean moisture and stains.